Lakeland, FL
Concrete Slabs and Pads in Lakeland, FL
Sheds, garages, RVs, AC units, hot tubs: almost every backyard project in Polk County starts with a slab. A good one is level, drains, and doesn't crack or sink into the sand. Compare local contractors and get free quotes for your pad.
Get a free slab or pad quote
Tell us about the job once. We pass it to a local crew that does this work. Free, no obligation.
Lakeland contractors who pour slabs and pads
Ready to get started?
Answer a few quick questions and we'll follow up with a quote.
12 concrete contractors on this page
12 concrete contractors
Great for a straightforward driveway or patio job.
Lains Concrete LLC in Lakeland takes the top spot, rated 5.0 out of 5 from 61 reviews.
Trusted local crew for residential concrete work.
Kirkland's Concrete, LLC in Lakeland lands at #2, rated 5.0 out of 5 from 27 reviews.
A solid pick for decorative and stamped finishes.
Caw Foundation construction in Lakeland lands at #3, rated 5.0 out of 5 from 25 reviews.
Well-reviewed for repair and resurfacing jobs.
Tiger Concrete & Screed LLC in Lakeland is rated, rated 5.0 out of 5 from 24 reviews.
Good fit for larger commercial concrete projects.
Luck Concrete Lakeland in Lakeland is rated, rated 5.0 out of 5 from 20 reviews.
Great for a straightforward driveway or patio job.
Donaldson Construction Company, LLC in Lakeland is rated, rated 5.0 out of 5 from 14 reviews.
Trusted local crew for residential concrete work.
Akap concrete LLC in Lakeland is rated, rated 5.0 out of 5 from 11 reviews.
A solid pick for decorative and stamped finishes.
Rock Solid Concrete, Inc. in Bartow is rated, rated 5.0 out of 5 from 10 reviews.
Well-reviewed for repair and resurfacing jobs.
Lil Hemby Concrete LLC in Winter Haven is rated, rated 5.0 out of 5 from 7 reviews.
Good fit for larger commercial concrete projects.
Freedom Concrete Construction - Davenport Florida in Davenport is rated, rated 5.0 out of 5 from 7 reviews.
Great for a straightforward driveway or patio job.
Mike LeMay Concrete & Layout LLC in Winter Haven is rated, rated 5.0 out of 5 from 6 reviews.
Trusted local crew for residential concrete work.
CS Concrete in Lakeland is rated, rated 5.0 out of 5 from 5 reviews.
What people pour slabs for
The use decides the thickness, reinforcement, and whether you'll need a permit. Tell your contractor exactly what will sit on the slab.
Shed and storage building slabs
A flat, level base that keeps a shed off wet ground and gives it something solid to anchor to.
Garage and workshop floors
Thicker slabs with thickened edges and rebar for detached garages, shops, and carports.
RV, boat, and trailer pads
Reinforced pads sized for heavy, parked loads so tires don't sink into the sand.
AC, generator, and pool equipment pads
Small pads that keep equipment level and out of standing water.
Hot tub and grill pads
Level pads for backyard extras, often poured with or next to a patio.
Driveway side extensions
Extra parking width alongside an existing driveway.
Pouring a slab for a new building? See footers and foundations. Fixing an old one? See slab leveling and concrete repair.
What affects concrete slab pricing
Two quotes for the same concrete slab can be far apart. These are the things that usually explain the difference, so you can compare quotes line by line.
Use and thickness
A 4-inch slab is fine for a shed, AC unit, or patio furniture. Garages, RV pads, and shop floors need thicker slabs, often 5 to 6 inches with rebar and thickened edges.
Size
Small pads have a fixed minimum for mobilizing a crew and a concrete truck, so a 4x4 generator pad costs more per foot than a 24x24 garage slab.
Site prep
Clearing, removing roots, and compacting sandy soil come before forms. Sloped lots may need fill or a short retaining edge.
Vapor barrier and reinforcement
Slabs under enclosed buildings usually get a vapor barrier. Rebar or wire mesh and fiber add cost but help control cracking.
Permits and inspections
Slabs for garages, sheds over certain sizes, and other structures often need a permit and sometimes engineered plans. Simple flatwork pads may not.
Typical concrete slab price ranges in Lakeland
These are typical ranges for the Lakeland area, used across our cost guides. They're for planning, not quotes. Your price depends on your site, the finish you pick, and the crew's schedule.
| Item | Typical range |
|---|---|
| Basic 4-inch slab or pad | About $6 to $12 per sq ft |
| Reinforced 5 to 6-inch slab (RV, garage, shop) | About $8 to $16 per sq ft |
| Small AC or generator pad | Often a few hundred dollars |
| Footings or thickened edges | Priced separately |
See the full breakdown by city in our cost guide.
How a concrete slab job works
- 1
Measure and plan
Confirm the size, thickness, and what will sit on the slab. Check whether a permit or engineered plan is needed.
- 2
Clear and grade
Remove sod and roots, then compact the soil. Low spots get filled and compacted in layers.
- 3
Forms, barrier, and steel
Forms are set to the right height and slope. A vapor barrier and rebar or mesh go in where needed.
- 4
Pour and finish
Concrete is placed, leveled, and finished smooth (for floors) or broom finished (for outdoor pads).
- 5
Cut joints and cure
Control joints are cut to guide cracking, and the slab is kept moist while it cures.
Concrete slab questions
How much does a concrete slab cost in Lakeland?+
A basic 4-inch slab or pad typically runs about $6 to $12 per square foot in the Lakeland area. Thicker, reinforced slabs for RVs, garages, and shops run more, often about $8 to $16 per square foot. These are typical ranges; small pads often cost more per foot because of crew minimums.
How thick should a shed or garage slab be?+
Four inches is common for sheds and light use. Garages and shops are often 4 to 6 inches with thickened edges and rebar. If the slab supports a building, follow the plans or your building department's requirements.
Do I need a permit for a concrete slab?+
It depends on what the slab is for and where you live. Slabs that support a structure usually need one. Simple flatwork often doesn't. Inside city limits check with your city's building department; unincorporated areas go through Polk County.
Can I pour a slab directly on Florida sand?+
Sand makes a good base once it's cleared of organic material and properly compacted. The problem is loose or uncompacted sand, which can settle and crack the slab.
How long before I can use a new slab?+
Light foot traffic after a day or two, light loads after about a week, and full loads like a vehicle or a building after the concrete has cured longer, usually closer to 28 days for full strength.
Find a concrete slab contractor near you
Get your concrete slab quote
Free, no obligation. Takes about a minute.